Vertigo V1 3D Print (.STL) Files Only

$45.00

3D print files (.STLs) of Vertigo V1 3 axis zoom gimbal.

In stock (can be backordered)

Description

Build your own 27x zoom gimbal!!!

Finally a DIY version of our best seller, the legendary Vertigo V1 27x! Vertigo FPV 27x is a custom balanced 27x zoom camera gimbal, so lightweight, that it can be easily attached to 3DR Iris+ or DJI Phantom, or a SkySurfer1400 size plane. And the experience is amazing. It is very natural to fly with the zoom and it gives you a lot of freedom. It really feels, that this is a must have feature in all FPV models.

The set includes:
  • .Stl files for 3D Printer

 

The .STL files will be available right after the purchase.

You can 3D print your parts, while you wait for the rest of the DIY KIT is shipped to you.

 

Vertigo Zoom Gimbal Specification:

Camera Model1/3'' SONY CCD 700TVL 27X ZOOMWeight398g | 0.87 lb
Sensor1/3'' SONY 960H EXview HAD CCD IIDimensions123mm / 120mm / 67mm | 4.84" / 4.72" / 2.63"
Optical Zoom27x, 3,5mm – 94,5mmPower Supply12V (3S LIPO)
Resolution 700TVLSupported Communication ProtocolsPWM / SBUS / PPM / SERIAL
Video InterfaceAV | USBGimbal Controller32 bit
Focus Systemhigh-speed digital auto-focusPitch Movement+40° to -90°
Focus ModesAuto / Manual / Push
Roll Movement+50° to -50°
Minimum illumination
0.001Lux low light
Yaw MovementYaw: ±175°
Synchronization System
Internal Synchronization
Operating Temperature14° to 113° F (-10° to 45° C)
Color SystemPAL | NTSC
ResolutionPAL:976(H) x 582(V)570K / NTSC:976(H) x 494(V)480K
Signal-to-noise Ratio
more than 50db (AGC OFF)
White Balance
Auto / Indoor / Outdoor / Manual / Single
Auto GainAuto / Manual (1-16 file)
AE ControlAuto / Shutter Priority
Backlight CompensationON / OFF
Electronic ShutterAuto 1/50 to 1/10, 000 / S
Noise Reduction
3D digital noise reduction
Adjustable BrightnessSupport
MenuEnglish OSD
Image Effectshorizontal mirror, backlight compensation, light inhibition
Protocol TypeVISCA, Baud Rate: 9600bps; PELCO-D, Baud Rate, 2400-38400bps
Day & Night
IR-CUT filter automatically switch day and night

 

PLEASE REMEMBER:

3D parts are NOT included. You need to use a 3D printer to print the .STL files in order to assemble the gimbal.
You will also need some tools like soldering iron, screw drivers etc.

 

Tutorials:

All the necessary steps to build the gimbal are provided in the 4 part tutorial:

Build time: 2h – 8h depending on your skills

 

Additional information

Weight 0.5 kg