Vertigo V2

UAV Camera Gimbal 

600TVL 27x Optical Zoom, Pal | NTSC video output.



Want to see whats going on 1 mile away? Just zoom in, and get a stable view of the situation.


Vertigo 27x HD V2 is a 3 Axis stabilised gimbal. Whether you pilot a copter or a plane, the gimbal will stabilise the video, and allow you to zoom easily to desired location.


Get the RTF kit, start flying the same day.

Weighs Only 520g  | 1.14 lb 
Supported Control Protocols: PWM / PPM / SBUS / SERIAL
PAL | NTSC | USB video output
Nvidia Jetson TX2 Compatible

Examples of Application:

Construction Site Inspections
High Voltage Lines Inspections
Aquiring Agriculture Data
Computer Vision Development
Police and Military Reconnaissance Missions

Camera Specification

Gimbal Specification

Camera Model1/3'' SONY CCD 700TVL 27X ZOOMWeight520g | 1.14 lb
Sensor1/3'' SONY 960H EXview HAD CCD IIDimensions127mm / 139mm / 92mm | 5" / 5.5" / 3.6"
Optical Zoom27x, 3,5mm – 94,5mmPower Supply12V (3S LIPO)
Resolution 700TVLSupported Communication ProtocolsPWM / SBUS / PPM / SERIAL
Video InterfaceAV | USBGimbal Controller32 bit
Focus Systemhigh-speed digital auto-focusPitch Movement+40° to -90°
Focus ModesAuto / Manual / Push
Roll Movement+50° to -50°
Minimum illumination
0.001Lux low light
Yaw MovementYaw: ±175°
Synchronization System
Internal Synchronization
Operating Temperature14° to 113° F (-10° to 45° C)
Color SystemPAL | NTSC
ResolutionPAL:976(H) x 582(V)570K / NTSC:976(H) x 494(V)480K
Signal-to-noise Ratio
more than 50db (AGC OFF)
White Balance
Auto / Indoor / Outdoor / Manual / Single
Auto GainAuto / Manual (1-16 file)
AE ControlAuto / Shutter Priority
Backlight CompensationON / OFF
Electronic ShutterAuto 1/50 to 1/10, 000 / S
Noise Reduction
3D digital noise reduction
Adjustable BrightnessSupport
MenuEnglish OSD
Image Effectshorizontal mirror, backlight compensation, light inhibition
Protocol TypeVISCA, Baud Rate: 9600bps; PELCO-D, Baud Rate, 2400-38400bps
Day & Night
IR-CUT filter automatically switch day and night

Product variants